Step 1 - Locate Permit Forms
Advertising Sign Permit Application and Instructions
Encroachment Permit
Entrance / Driveway Permit
- Entrance / Driveway Permit Instructions (Procedure)
- Entrance / Driveway Permit Application
- Roads Permit Policy
Standard Drawings and Specifications
OPSD 301.01 Rural Entrances to Roads on Fill
OPSD 301.02 Rural Entrances to Roads in Earth Cut
OPSD 351.01 Urban Residential Entrance with Boulevard
FSAS-01 Farm Site Access Standard to Roads on Fill for Large Farm Equipment
FSAS-02 Farm Site Access Standard to Roads in Earth Cut for Large Farm Equipment
CSAS-29 Entrance to Small Utility Station
Oversize / Overweight Permits
Annual Oversize Permit:
(Calendar year January 1 to December 31)
Exceptional Move Permit:
For vehicles over 5.0 Metres (16’5”) in width and/or over 45.75 metres (150’) in length and/or in excess of 63,500 kg (140,000 lbs) in weight. Police escort is required in some cases, see permit for details.
An Overload Permit is required when dimensions or weight exceeds the normal limits permitted by legislation. Details as follows:
Maximum Width
Vehicle Including Load - 2.6 Metres
Exceptions
- Raw Forest Products (En Route) - 2.8 Metres
- Road Service Vehicles defined as vehicles travelling to and from a maintenance site or repair centre - No Specified Limit
- Loose farm products (including rectangular and round bales of hay) - No Specified Limit
Maximum Length
Single Vehicle Including Load - 12.5 Metres
Exceptions
- A Fire Apparatus
- A Semi-Trailer
- An Articulated Bus
Maximum Length (Semi-Trailer)
Semi-Trailer Including Load - 14.65 Metres
Maximum Length Combination
Combination of Vehicle and Load - 23.0 Metres
Maximum Height
Vehicle and Load - 4.15 Metres
Maximum Weight
Maximum wight allowances are determined using axle configurations and spacing. An overload permit is required if the axle and/or gross vehicle weight exceeds the limits set out in the Highway Traffic Act (HTA).
Farm Vehicle Exemption
Over-dimensional farm vehicles are exempt from permit requirements when the vehicle is self-propelled or drawn by a farm tractor.
Who do I contact for using a King's Highway (i.e. Highway 10)?
Ministry of Transportation
Some lower tier municipalities require an oversize permit when using their local roads. You will need to contact that Municipality to discuss their requirements.
Special Event Application and Instructions
- Grey County Roads Special Event Permit Online Application *Our online application system is currently in redevelopment, please use the PDF application below
- Grey County Roads Special Event Permit Application
- Grey County Roads Special Event Permit Procedure
- Grey County Roads Special Event Permit Policy
Step 2 - Make Payment
Payment Methods
- Cheque made payable to the Corporation of the County of Grey
- Visa or MasterCard (email roads@grey.ca or visit the County of Grey’s Administration Building)
- Debit (on site at the Owen Sound Administrative Office Only)
Submission Methods
Completed permits and payment can be:
Emailed to: roads@grey.ca
Faxed to: (519) 376-0967
Mailed to:
Transportation Services Department
County of Grey
595 – 9th Avenue East
Owen Sound ON N4K 5N1
General Inquiries: (519) 372-0219 ext.1217
Step 3 - Process & Turnaround Time
Entrance, Encroachment and Advertising Signs Permits
Once a completed permit application and payment have been received at the Grey County Transportation Services Department office, it can take up to 4 weeks (20 business days) for the permit to be reviewed and signed off by all parties at the County. During this period, the permit location is visited by County personnel in the field to ensure that it meets the County’s specifications for a road access location. It is then returned to the office where it is signed off by the Director. Then the approved permit is returned to the applicant with instructions on how to proceed. Should the permit not meet specifications, County personnel will contact the applicant and advise them of the problem.
Release of Holdback Fee for Entrance Permits
Once an entrance has been installed, please complete the Declaration for Holdback Release Form (included in package) and submit to the office. Once again County personnel will visit the permit location and view the work that has been done. If all requirements of the permit have been met, the County will process the refund of the deposit. It can take up to three (3) weeks for a cheque to be processed.
If the entrance does not meet County specifications, the applicant will be advised of what is required to properly finish the entrance. Once this remedial work is completed, the applicant must once again request an entrance inspection and have it passed by County personnel prior to the deposit being refunded.